KV2audio EX6/KX1.2 Aktiv PA sæt,
Bestående af 2 stk EX6 og 1 stk. sub KX1.2
860 W RMS..........
The EX6 is a very high quality compact speaker system producing a 2-way full range solution which defies its size. With amazing clarity for speech and musical reproduction, the EX 6 is perfect for discreet installations or audio visual presentations where sound quality is paramount but size also matters. Equally at home as a high end studio monitoring solution the EX 6 features state of the art components including our new NVPD compression driver, Trans-Coil 6 woofer and complete on-board controlwith electronic crossovers, phase alignment, equalization and speaker protection integrated into the EX6s amplifier module.
EX6 aktiv tophøjttaler
System Acoustic Perfomance
-3dB Response 68Hz - 20kHz
-10dB Response 62Hz - 28kHz
Max SPL Long-term 117dB
Max SPL Peak 120dB
Crossover Point 2.0kHz
High Frequency Section
Throat Exit Diameter/ Diaphragm Size 1" / 1.75"
Diaphragm Material Nitride Titanium
Magnet Type Neodymium
Horn with Constant Directivity Coverage Horizontal/ Vertical 100° x 100°
Low Frequency Section
Acoustic Design Front Loaded, Bass Reflex
Woofer Size/ Voice Coil Diameter/ Design 6" / 1.75" / Trans Coil
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium
Signal Input
Input Impedance 20 kΩ
Input Sensitivity 1.0V rms
Power Connector
Power Connector Neutrik PowerCon®
High Frequency Amplifier
Type Class AB Push-Pull
Rated Continuous Power 20W
Distortion <0.05%
Operating Bandwidth 2.0kHz - 28kHz
Physical Dimensions
Height 390mm (15.35")
Width 220mm (8.66")
Depth 270mm (10.63")
Weight 12kg (26.4lbs)
Bass Amplifier Specification
Type High Efficiency Switching
Rated Continuous Power 180W
Distortion <0.05%
Operating Bandwidth 62Hz - 2.0kHz
Recommended Amperage
Recommended Amperage 2.5A 115V
1.25A 230V
Operating Voltage
Operating Voltage 100 - 120V @ 60Hz
230 - 250V @ 50Hz
KX1.2 aktiv sub....
KX 1.2 is the smallest subwoofer in the KX series and provides a substantial low frequency output that belies its size. Housing a single 12" Neodymium woofer it is a truly portable unit that can be used to extend the usable frequency range of any KX Audio, KV2 Audio or other third party louspeaker system. Its extended low frequency response and high SPL make is an excellent choice for many applications. On-board electronics ensure fast, easy set up and complete control with stereo electronic crossovers, equalization and speaker protection integrated into the KX1.2's amplifier module.
Applications
Portable P.A. for Solo Artists, Duos and Live Bands
Mobile DJ Sub bass reinforcement
Stand-alone subwoofer to supplement and existing passive or active system
Features
500W high-efficiency, high current amplifier.
12 neodymium, high output, high efficiency
low frequency driver with 3 (75mm) high
temperature voice coil assembly and reinforced,
treated cellulose cone assembly.
Double, asymmetric acoustic chambers provide very
high loading and high acoustic output.
Complete, on-board subwoofer management
including equalization, crossover filters, amplifier
overdrive protection, output level and phase controls.
Left & Right Stereo or Mono inputs with through
signal outputs and high pass outputs.
Professional, Baltic birch construction with highly
resistant polymer coating.
Two recessed, centre balanced side handles
for simplified handling and carrying.
High impact, low friction feet are located on
bottom. Registered cut-outs are placed on top
of cabinet allowing for interlocking and
stacking of multiple cabinets.
Top hat for pole insertion and speaker placement.
LED indicators for signal present, limiter, thermal
condition and power ON status.
Product KX1.2
System Acoustic Perfomance
-3dB Response 38Hz - 125Hz
-10dB Response 32Hz - 125Hz
Max SPL 127dB
Crossover Point 125Hz
Low Frequency Section
Acoustic Design Twin Asymmetrical loading
Woofer Size 300mm (12.00")
Voice Coil Diameter 75mm (3.00")
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium
Design Inside-outside
Bass Amplifier Specification
Type High Efficiency Switching
Rated Continuous Power 500W
Distortion <.05%
Operating Bandwidth 32Hz - 125Hz
Signal Input
Input Impedance 20Ω
Input Sensitivity 0.75V rms
Physical Dimensions
Height 370mm (14.57")
Width 550mm (21.65")
Depth 570mm (22.44")
Weight 32kg (70.4lbs)
Power Connector
Power Connector IEC 320
Recommended Amperage
Recommended Amperage 6A 115V
3A 230V
Operating Voltage 100-120V @ 60Hz
230-250V @ 50Hz
