QSC PA anlæg 1700 W RMS aktive højtalere...
incl. stativer og kabler.... Sættet består af : 2 stk HPR-122i aktive tophøjtalere 1 stk HPR-151i aktiv subwoofer 2 stk 10 mtr. kaber 2 stk 3 mtr. kabler 2 stk K&M højtalerstativer.. The HPR122i offers performers and audio professionals the power, technology and legendary reliability of QSC amplification combined with the simplicity and convenience of a multipurpose powered loudspeaker system. Whether your application is vocal reinforcement, dance music, or full tilt rock and roll and whether your need is main PA, or stage monitor, suspended or pole mounted, the HPR122i is your solution. With 131 dB of maximum output the HPR122i outperforms molded plastic box systems without significant additional weight or cost.
A 12" low-frequency woofer with 3" voice coil is powered by 400 watts of class H power. A neodymium magnet design provides ample motor strength for low end performance without adding unnecessary weight. The 1.4" diaphragm neodymium compression driver is powered by a 100 watt, class AB+B amplifier and is loaded on a 75º conical horn. Its the same high-frequency driver youll find on the HPR153F 3-way loudspeaker system. - Ideally suited for use as main PA or monitor
- High continuous power: 500 watts total amplifier power
- 75º conical horn provides predictable coverage regardless of
cabinet orientation - Nine (9) M10 suspension points allow for multiple
suspended applications HPR122i
|  | | SPECIFICATIONS | HPR122i | | Configuration | 12" 2-way multipurpose powered loudspeaker | Transducers
Low Frequency
High Frequency |
12" neodymium transducer with 3" voice coil
1.4" diaphragm compression driver | Frequency Response (-3 dB) 1
Frequency Range (-10 dB) 1 | 62 Hz - 18 kHz
53 Hz - 22 kHz | | Nominal coverage (-6 dB) | 75° conical | | Maximum SPL (1 meter) | 131 dB peak | | Amplifier | | Power output | 400W LF Class H
100W HF Class AB+B | | Input impedance | 22k balanced
11k unbalanced | | Controls | Gain
Low-cut filter (Main / Monitor)
Front LED On/Off
Power
Circuit breaker | | Indicators | Power
Signal
Limit | | Cooling | Convection | | Amplifier protection | Thermal and output power limiting
Output short circuit
Overtemperature muting
Driver DC protection | Current consumption at 120 VAC
(1/8 power EIA noise) | 1.5A | | Enclosure | Painted Birch plywood | | Finish | Black textured paint | | Grille | Powder coated 16 gauge steel | | Suspension/Attachment Points | 9 M10 rigging locations | | Connectors | Balanced female XLR line level input
Balanced male XLR full range line level out | | Dimensions | 26.9 " H x 14.7 " W x 14.9 " D
(683 mm x 373 mm x 379 mm) | | Net weight | 60 lbs / 27.2 kg | | Available Accessories | HPR COVER 122
HPR POLE 31
HPR YOKE 122
HPR M10 KIT
HPR SUS KIT 122 |
1 Measured in half-space.
Specifications subject to change without notice.
For high-level dance music or reinforcement of bass instruments and kick drum, an HPR series subwoofer will add low-frequency extension and power to any sound system. When the requirement is for compact size and tight, punchy low-end, the single 15" HPR151i subwoofer is the answer. The 700 watt power module is capable of producing 133 dB peak SPL with frequency response down to 43 Hz and sound quality that rivals many 18" subwoofers. A top-mounted 35mm pole socket is provided for use in sub/satellite systems. - Power module based on the best-selling RMX series amplifier technology provides 700 watts of class H power
- Attractive and professional appearance
- Rugged birch enclosure
- Tour-grade 16 gauge steel grille
- Ergonomic handles with comfortable, non-slip grip
- 35 mm pole socket
Applications: - Live sound reinforcement of bass, kick-drum, etc.
- Higher-SPL dance music
HPR151i
|  | | SPECIFICATIONS | HPR151i | | Configuration | 15" powered subwoofer | | Transducer | 15" cone transducer with 3" voice coil | Frequency Response (-3 dB) 1
Frequency Range (-10 dB) 1 | 51 Hz - 105 Hz
43 Hz - 145 Hz | | Maximum SPL (1 meter) | 133 dB peak | | Amplifier | | Power output | 700W Class H | | Input impedance | 22k balanced
11k unbalanced | | Controls | Gain
Front LED On/Off
Power
Circuit breaker
Phase | | Indicators | Power
Signal
Limit | | Cooling | Convection | | Amplifier protection | Thermal and Output Limiting
Output Short Circuit
Overtemperature Muting
Driver DC Protection | Current consumption at 120 VAC
(1/8 power EIA noise) | 2.2A | | Enclosure | Painted Birch plywood | | Finish | Black textured paint | | Grille | Powder coated 16 gauge steel | | Connectors | Balanced female XLR line level inputs x 2 (L+R)
Balanced male XLR full range line level throughputs x 2 (L+R)
Male XLR low-cut line level outputs x 2 (L+R) | | Dimensions | 25.6" H x 22" W x 20.75" D
(651mm x 559mm x 525mm) | | Net weight | 98 lbs. / 44.5 kg | | Available Accessories | HPR COVER 151
HPR POLE 26
HPR POLE 31 |
|
