Warwick forstærker WA 600S
Produkt 12/18
 
Warwick forstærker WA 600S
Klik for større billede
4.995,00DKK
Antal

Warwick forstærker WA 600S

  - 600 Watt Power Amp
- 19” Housing for rack mounting
- Class A Low Noise Preamp
- 2 Way EQ with controls for bass and treble
- 10 Way graphic Equalizer, switchable
- Mute Switch
- Adjustable, switchable compressor
- 2 Inputs for active or passive Basses
- The two instrument inputs are suitable for 2 instruments at the same time
- Line Output with Ground Lift switch
- balanced DI output with switch Pre / Post EQ
- FX Loop
- Tuner Output
- Aux Stereo-Input, Mini jack for connecting MP3 player, CD player etc.
- Integrated headphone amplifier. Aux in stereo signals over headphones in stereo
- 2 coaxial, lockable connectors for Speaker Systems
- Temperature-dependent fan
- Dimensions in mm (B/H/D 483 x 90 x 340
- Weight: 18 kg

The all new WA 600 drives 600 watts of pure bass power of loud yet refined classic Warwick amplifiers. Modeled on the award-winning Hellborg amplifier series and offering great tonal versatility you can be sure to count on this amp head wherever and whatever you play.
Classic sound with modern performance. Manufacturing techniques and component quality has improved drastically over the last couple of decades. Noise and hum are no longer unavoidable side effects of great sound. So here we have recreated the “Classic” 10 band graphic EQ powered Bass Amp with big, powerful, tight sound in a modern package.
Our considerations in these amp designs were multifold and our objective is to provide:
• An affordable amp for the serious up and coming musician.
• A seasoned professional’s gig amp.
Here is a short explanation of the underlying design concepts.
CLASS-A CIRCUITRY
Class-A amplifiers are typically more linear and, as such, are less complex than other amplifier classes. The amplifying element is biased so the device is always conducting to some extent. This means the amplifier is always on, avoiding the problem of crossover distortion associated with class-AB and -B designs.

LOW-Z CIRCUITRY
By lowering the impedance inside an electronic circuit you lower the amount of thermal noise. In an amp where you have tone controls that lift mids and highs a considerable amount, proper impedance level makes the difference between enduring audible annoying hiss, and enjoying a pleasant tonal experience.

DYNAMIC DISTORTION LIMITER™
Distortion occurs when an amplifier works beyond its range, when the power supply cannot supply the power any more to take the amp higher. A common method to control distortion in amps is to use a limiter, a device that stops the signal going beyond a specific level. Audio limiters work by setting a threshold signal level where the circuit kicks in and keeps signal levels within the capabilities of the power supply. This method is not very precise and often causes audible effects such as pumping and thumps. We designed a circuit that instead reads the distortion level in the power amp and starts limiting as soon as the amp shows even miniscule amounts of distortion. This means our amps always stay within 0.3% distortion (THD) when most amps are rated at between 5-10% distortion (that means that to get your 600 Watts out of a 600 Watt amp you will get it audibly distorted and if you want a clean signal the power will be a lot less). There are desirable types of distortion, but these are not usually associated with transistor amplifiers, but more commonly associated with tube amps and effect pedals. Warwick’s goal is to give the user a great, clean sound allowing the user to decide how much, and what kind of distortion to employ.

Læs el. skriv anmeldelser: 0
 Skriv anmeldelse
Udskriv produktark

Mærke
Nyheder
Roland PK-6 midi pedalspil

Roland PK-6 midi pedalspil

4.595,00DKK
5.190,00DKK
Indkøbskurv

Din indkøbskurv er tom!

Kundelogin
Opret konto
Nyhedsbrev